Berghmann Large Bandsaw Extractor - Three Phase

£1,060.00 + VAT

Product Code: BER403BSW

Available Options



  • A stand-alone extractor which is ideal for use with large band saws.
  • It has sufficient performance to provide both bottom and top extraction.
  • It has been designed to be low-enough to sit below the bed of the bandsaw so as to avoid any obstruction to the cutting process.


  • Machine Width: 550 mm (620mm inc.hose inlets)
  • Machine Depth: 730mm (750mm inc. shaker handle)
  • Machine Height: 865mm
  • Filter area: 1.4m²
  • Capacity of Dust Tray: 18 litres
  • Please select from the drop down above the required size and quantity of extraction ports. If your required combination is not available, please contact us on 01920 824 770.
  • Gross weight: 74kg
  • Motor power rating: 0.75Kw (1hp) 230/1/50
  • Full Load Amps: 5.1A
  • MCB: 10A Type C
  • The extractor is designed to be wired in with your machine so that it starts when the machine is turned on. A No Volt Release Starter is available if required, to enable independent start up.
  • ATEX Explosion Relief Panel available if required. A Certified Explosion Vent Relief Panel is available to order if required to meet local authority or HSE requirements.
  • Three phase electrical supply.
  • There is an extra carriage charge for this item.